MyFireplaceBlower
GZ550-1KT Fireplace Blower for Napoleon Fireplaces
- UPC:
- 810136900583
- MPN:
- GZ550-1KT
- Availability:
- In Stock - Free shipping to 48 States. Ships to Canada USPS. Normally ships by Next Business Day.
Description
Our GZ550-1KT Blower Fan Kit is designed for Napoleon fireplaces to circulate air around the firebox and enhance heat output. This complete fireplace blower kit offers a low cost solution to push heat created by the fireplace into your living space.
Included with the blower kit: Variable Speed Switch, (rheostat control - like a light dimmer) which you can regulate air flow and any air noise from the fireplace fan and Thermo Switch (Thermodisc), a Heat Sensor which automatically turns the Blower ON after the fireplace heats up and automatically turns the Blower OFF after the fireplace cools down.
GZ550-1KT Blower Kit Installation Instructions
Fireplace Blower Kit Includes
- Blower
- Variable Speed Control
- Thermodisc - Automatically turns blower on at 120F and turns blower off at 90F
- Mounting Brackets
- Cord Set with 3-prong Power Cord
- Hardware & Foam Dampening Strips
- 3-Prong to 2-Prong adapter
- Installation Instructions
- 1 Year Comprehensive Warranty
Product Specifications
- Dimensions in Inches: W: 10.58 x H: 3.6 x D: 4.27
- Motor is equipped with Thermal Safety Switch
- Bearing Construction Type: Ball Bearings
- CFM: 125
- AMPS: 0.70
- HZ: 60
- Volts: 115
- RPM: 3000 (1/1950 with load)
- Rotation: CCW
- Blower Wheel Dimensions: Width: 7.10in (180mm) Diameter: 2.56in (65mm)
- Anti-Vibration Impellers & Vortex Regulation Tabs to provide a steady airflow
Product Benefits
- This fireplace blower fan produces high airflow and is manufactured with quality parts and components
- Increase Heating Potential of your gas fireplace insert with this High Airflow Blower Fan
- Simple wiring connections makes installation Quick and Easy
If you have had any custom work done to your gas fireplace insert, compare the dimensions listed with the clearance in your appliance to insure proper fit.
GZ550-1KT Fireplace Blower Diagram with Dimensions
This fireplace blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket fireplace blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact fireplace model, though we try to provide technical support in assisting you.
24 Reviews
-
Prompt Shipping and Good Product
Staff were knowledgeable of their product and shipping procedures to Canada.Delivery was quick and the detailed instructions with the fan resulted in a fast install.Wish the fan could cut in at perhaps a couple of degrees lower, but not a big problem.
-
Simple, Clean, and Easy to Use
I purchased a new home and the fireplace didn't come with a blower (like others on this site). Blower was shipped quickly, best price around, and took me about 25 minutes from un-boxing to turning on the fireplace to test it out. If you back off the dial a little bit from full speed, the blower is nice and quiet. It blows a lot of air for the size, and helps to heat nearly the entire house since our family room has vaulted ceilings that end up near the bedrooms.
-
Really Happy with Blower
Purchased a new home in January last year and the fireplace didn't come with the blower....wasn't impressed with that. Just purchased the blower kit and it was shipped that same day. The installation was straight forward but agree the theromsat sensor was a little tricky. Really impressed with the amount of air that comes out when it's working...really throws it out! Was my first time ordering from here and would recommend to anyone!
-
great service and products
I have ordered from here twice recently and found them to be very friendy, courteous, helpful and the produts are first rate. Their customer service is first rate and the prices very good, i would not hestitae to order from here again.
-
Easiest install ever
The instructions were very well written, no surprises at all. Everything I needed came with it(except tools of course). Made a huge difference with my fireplace, pushes a lot of air. It's a little noisy on full speed but dialed back a little it's hardly noticeable.
-
Blower kit for Napoleon
Once installed the blower works well. The instructions seemed straightforward enough but the access to my Napoleon fireplace was extremely cramped with dangerous sharp screw ends and metal edges which cut my hands and arms as I tried to fit the fan to the back attachment. Once in place (had to open the glass door) and secure the rest was easy. Delivery and phone assistance excellent
-
Lots of blood
The service was great and it did turn out to be the correct unit, however there were some issues. Forget a 15 minute install. I did manage to fit it in after removing the glass front but the many screws and barriers made the job hazardous. I have perhaps 40 scratches on my hands and arms from sharp screws that seem to be always in the way. My advice is take your time positioning the fan. At least when you are done you can feel proud you did it yourself!
-
GZ550-1KT
The same blower costs 270C$ + tax in Ontario, so the price is a steal. The delivery took 10 days. Performance wise and installation is not too bad. However, the transformer is somewhat noisy and the thermostat switch is not so easy to install.
-
Great blower kit
My order was processed and shipped the same day. Install was as expected and went without a hitch. The fan is well damped by the anti-vibration pad and is near silent. This is a great addition to my fireplace.
-
GZ550-1KT
I received my fireplace blower today and it was a snap to install thanks to the clear instructions. Thanks so much for the fast shipping!
Related Products
GZ550-1KT Fireplace Blower for Napoleon BGD36PTR Fireplace
Napoleon
GZ550-1KT Fireplace Blower for Napoleon BGD36NTR Fireplace
MyFireplaceBlower
GZ550-1KT Fireplace Blower for Napoleon GD33NR Fireplace
Napoleon