GZ550-1KT Fireplace Blower for Napoleon BGD42P Fireplace

Our GZ550-1KT Blower Fan Kit is designed for the Napoleon BGD42P gas fireplace insert to circulate air around the firebox and enhance heat output. This complete fireplace blower kit offers a low cost solution to push heat created by the fireplace into your living space.

Included with the blower kit: Variable Speed Switch, (rheostat control - like a light dimmer) which you can regulate air flow and any air noise from the fireplace fan and Thermo Switch (Thermodisc), a Heat Sensor which automatically turns the Blower ON after the fireplace heats up and automatically turns the Blower OFF after the fireplace cools down.

 GZ550-1KT Blower Kit Installation Instructions

Fireplace Blower Kit Includes

• Blower
• Variable Speed Control
• Thermodisc - Automatically turns blower on at 120F and turns blower off at 90F
• Mounting Brackets
• Cord Set with 3-prong Power Cord
• Hardware & Foam Dampening Strips
• 3-Prong to 2-Prong adapter
• Installation Instructions
• 1 Year Comprehensive Warranty

Product Specifications

• Dimensions in Inches: W: 10.58 x H: 3.6 x D: 4.27
• Motor is equipped with Thermal Safety Switch
• Bearing Construction Type: Ball Bearings
• CFM: 125
• AMPS: 0.70
• HZ: 60
• Volts: 115
• RPM: 3000 (1/1950 with load)
• Rotation: CCW
• Blower Wheel Dimensions: Width: 7.10in (180mm) Diameter: 2.56in (65mm)
• Anti-Vibration Impellers & Vortex Regulation Tabs to provide a steady airflow

Product Benefits

• This fireplace blower fan produces high airflow and is manufactured with quality parts and components
• Increase Heating Potential of your gas fireplace insert with this High Airflow Blower Fan
• Simple wiring connections makes installation Quick and Easy

If you have had any custom work done to your gas fireplace insert, compare the dimensions listed with the clearance in your appliance to insure proper fit.

 GZ550-1KT Fireplace Blower Diagram with Dimensions

This fireplace blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket fireplace blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact fireplace model, though we try to provide technical support in assisting you.