MyFireplaceBlower
FK4 Fireplace Blower Kit for Heatilator Fireplaces
- UPC:
- 810136900248
- MPN:
- FK4
- Availability:
- In Stock - Free shipping to 48 States. Ships to Canada USPS. Normally ships by Next Business Day.
Description
Our FK4 Blower Fan Kit is designed for Heatilator and other fireplaces to circulate air around the firebox and enhance heat output. This complete fireplace blower kit offers a low cost solution to push heat created by the fireplace into your living space.
Included with the blower kit: Variable Speed Switch, (rheostat control - like a light dimmer) which you can regulate air flow and any air noise from the fireplace fan and Thermo Switch (Thermodisc), a Heat Sensor which automatically turns the Blower ON after the fireplace heats up and automatically turns the Blower OFF after the fireplace cools down.
FK4 Blower Kit Installation Instructions
Fireplace Blower Kit Includes
- Blower
- Variable Speed Control
- Thermodisc - Automatically turns blower on at 120F and turns blower off at 90F
- Cord Set with 3-prong Power Cord
- Adhesive Velcro Strips/Dampening Pad - (Easy to install plus reduces Vibration)
- Installation Instructions
- 1 Year Comprehensive Warranty
Product Specifications
- Dimensions in Inches: W: 12.94 x H: 3.6 x D:4.27
- Motor is equipped with Thermal Safety Switch
- Bearing Construction Type: Ball Bearings
- CFM: 135
- AMPS: 0.74
- HZ: 60
- Volts: 115
- RPM: 3000 (1/1400 with load)
- Rotation: CW
- Blower Wheel Dimensions: Width: 9.45in (240mm) Diameter: 2.56in (65mm)
- Anti-Vibration Impellers & Vortex Regulation Tabs to provide a steady airflow
Product Benefits
- This fireplace blower fan produces high airflow and is manufactured with quality parts and components
- Increase Heating Potential of your gas fireplace insert with this High Airflow Blower Fan
- Simple wiring connections makes installation Quick and Easy
If you have had any custom work done to your gas fireplace insert, compare the dimensions listed with the clearance in your appliance to insure proper fit.
FK4 Fireplace Blower Diagram with Dimensions
This fireplace blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket fireplace blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact fireplace model, though we try to provide technical support in assisting you.
29 Reviews
-
FK4 Fireplace Blower Kit
The unit worked fine and the instructions were simple to follow. The only problem I had, which was not the fans fault, is in trying to install the fan in my see-thru fireplace. The side wall the fan would rest against had screws protruding thru the wall and were in the way. The velco adhesive strips couldn't be used. I had to screw it into place, which was a trick but it worked.
-
FK4 Blower Kit
Very easy to install blower in Heatilator unit. Works great. The only reason I did not give it 5 stars was I thought the blower was a little loud when it is on the fastest speed. Overall, very satisfied. Would buy again.
-
FK4 FIREPLACE BLOWER KIT
The blower shipped quickly and was well packaged. The instructions were easy to follow. As others have noted, it is installed in tight quarters but the installation was very straight forward. Our fireplace was already setup with a switched outlet and no tools were required to get the blower working. I would recommend this blower and company.
-
FK4 Blower
These are awesome! I've installed over 200 of these in homes in my neighborhood over the last few years. Only had a 1 or 2 go bad on me. They are quiet...durable...and make gas fireplaces actually efficient! Easy to install. Highly recommend!
-
Great product makes my wife happy!
It was a tight fit, I am old, but I got it in with a little bit of work, had a small problem with sensor and the person I called at the company helped me place it in the right place. I had it to close to the pilot light, great service very happy
-
fk4 fireplace blower kit
I called and they were very helpful in telling me how to install it myself. They were excellent help and the blower now works.
-
Compact but efficient
I wound up buying the smaller blower due to the fireplace clearance but am happy with the easy installation and quiet operation. Would recommend to others.
-
Only had it a short time but it works well so far and was easily installed
I would highly recommend this product
-
FK4 Fireplace Blower Kit for Heatilator
This was an upgrade for us as our previous fan had one speed and had to be plugged in and unplugged each time we used it. This one has been great so far (have been using it almost daily for a week or two). The fan speed dial is great because you can choose more air (and corresponding sound), or you can dial it down if you want. The fact that it can be wired into the fireplace was also a bonus for us. No more bending down and opening the front cover to plug in. Very satisfied!
-
FK4 FIREPLACE BLOWER KIT FOR HEATILATOR
Easy to install. Seems sturdy. Works well. There is a bit of high pitch whine at high speed.
Related Products
FK4 Fireplace Blower for Heatilator GNDH33 Gas Fireplace
Heatilator
FK4 Fireplace Blower for Heatilator BCDV36 Gas Fireplace
Heatilator
FK4 Fireplace Blower for Heatilator GNBC36, GNBC33LE Fireplace
Heatilator